Connect with us

IPod/IPhone Car Charger

Discussion in 'General Electronics Discussion' started by MEESEN, Sep 6, 2011.

Scroll to continue with content
  1. MEESEN

    MEESEN

    1
    0
    Sep 6, 2011
    Hey Guys new to this forum :)

    Wanting to mod my Cars Headunit, Done it but want to improve the setup,

    The Mod i have done is this one (http://www.ls1gto.com/forums/showpost.php?p=3363064&postcount=276)

    I now want to take it a step further and use a ipod/iphone connector cord (30 Pin) Pinouts

    Pin 3 is Line Out Right
    Pin 4 is Line Out Left

    Not sure on the Ground to use though and im pretty sure Pin 23 is power (only 5V though so would need a resistor in line somewhere)

    Would also like the ipod to turn off when the car is turned off Pin 21 does something with that (different resistances do different things ie.1MOhm - Belkin auto adaptor, iPod shuts down automatically when power disconnected Connecting pin 21 to ground with a 1MOhm resistor does stop the ipod when power (i.e. Firewire-12V) is cut.)

    Can anybody give me a hand figuring something out?

    Thanks in advance :)
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-