Maker Pro
Maker Pro

introduction

sanapathi

Dec 3, 2012
2
Joined
Dec 3, 2012
Messages
2
i need air lift pump calliculations for cement conveying. if any body knows help me in this matter
 

davenn

Moderator
Sep 5, 2009
14,254
Joined
Sep 5, 2009
Messages
14,254
hi there sanapathi

welcome to the forums :)

dont think you will find that sort of info on this forum as its not really hobby or any sort of electronics, more of a question in physics, but maybe some one has had experience in the field :)

Dave
 

shrtrnd

Jan 15, 2010
3,876
Joined
Jan 15, 2010
Messages
3,876
You probably need to enter questions in the appropriate category for specific answers.
I used to work in a cement plant. Most of the info you need for your question will be
heavily dependent on the equipment you're using. Often, whatever manufacturer you're
buying from will offer assistance with your specific needs.
I don't know your application, if you're just working cement or what else.
The plant I worked at made cement, mortar, lime, etc, ...
Your calculations change with your product.
When you have specific questions or applications, somebody might be able to help
when you ask your questions in the other categories on this site.
Introductions category is just that.
 
Top