Connect with us

Intermittent failure to Eject - Sony Camcorder

Discussion in 'Electronic Repair' started by [email protected], Dec 13, 2005.

Scroll to continue with content
  1. Guest

    I have a Sony TRV-68 HI-8 camcorder where you flip open the lid over
    the tape & then press a small blue 'Eject' button to eject the tape.
    Lately the 'Eject' does not always work. I found that it DOES seem to
    work if I move the lid just slightly towards the closed position - so
    I'm suspecting a break in the wires leading to the lid.

    The other VCR controls on the lid work fine.

    I am reasonable handy - and wonder if is it (relatively) easy to try to
    fix the broken wire myself or is this best left to the pro's?

    Thanks, Cindy
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-