Connect with us

Interfacing Raspberry Pi with Keithley 3390

Discussion in 'Microcontrollers, Programming and IoT' started by John Manuel, Jun 21, 2018.

Scroll to continue with content
  1. John Manuel

    John Manuel

    20
    0
    Jun 7, 2018
    I wanted to interface Rpi with the function generator Keithley 3390. My goal is to capture the signal which Keithley 3390 generates and plot it using Rpi, i.e, to function it as an oscilloscope. I went through the reference manual of Keithley 3390 but could not come up with a solution. Please help.
     
  2. Harald Kapp

    Harald Kapp Moderator Moderator

    11,292
    2,585
    Nov 17, 2011
    The manual describes in chapter 7 how to send commands and receive data.
    Appendix C shows application examples.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-