Maker Pro
Maker Pro

interaction with signals

bhuvanesh

Aug 29, 2013
201
Joined
Aug 29, 2013
Messages
201
i want to experience(see) how the two signals are added or multiplies or scaled will be.i cannot install matlab to view that since my comp is not that much capable of .so please say me any site for that or any small software to see those operation visually .Thank you
 

Harald Kapp

Moderator
Moderator
Nov 17, 2011
13,700
Joined
Nov 17, 2011
Messages
13,700
Try LTSPICE (free). You can visually add voltage sources of different frequencies and waveforms and plot the resulting waveform like on an oscilloscope. I have put a few tips for LTSPICE in the ressources section of this forum.

There are other similar simulators like TINA by Texas Instruments etc.. Google can help.
 
Top