Connect with us

Infrared control for motorised projector screen

Discussion in 'LEDs and Optoelectronics' started by KiWiMorgs, May 23, 2016.

Scroll to continue with content
  1. KiWiMorgs

    KiWiMorgs

    1
    0
    May 23, 2016
    Hello everyone,

    I'm looking for some help please to convert my RF controlled projector screen to IR, controllable via my universal remote.

    The screen currently has the RF electronics, but I can effectively remove this, leaving a 24vdc (will confirm this voltage) motor which I was hoping to connect to a relay controller via infrared. The motor has 4 connections - earth, neutral, and a connection for each motor direction.

    I was thinking I could purchase a part like in the pic? Just need to be able to control the motor 'up', 'down', and 'stop'.

    Any help would be greatly appreciated. Thank you.
     

    Attached Files:

    Last edited by a moderator: Jun 7, 2016
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-