Connect with us

Infocus Projector intermittent failure

Discussion in 'Electronic Repair' started by ninthtoe, Nov 8, 2005.

Scroll to continue with content
  1. ninthtoe

    ninthtoe Guest

    I have an Infocus LP400. It either works perfectly or fails to light
    the lamp. Unable to determine whether it is the day of the week or
    just it's mood that affects it. Have tried getting it going with data
    signals and checking the lamp is firmly seated. Any advice welcome
    thanks
     
  2. Guest

    Send it to Infocus for repair if they will still touch it.
    Honestly, you are not going to be able to get any parts or service
    information out of them for the unit. It could be a bad lamp, bad
    ballast, bad main power supply, or a control signal problem.
     
  3. carneyke

    carneyke Guest

    Go to one of the sites that sell bulbs (projectordoctor.com) and see if
    the LP400 has bulbs listed. Some of these projectors had problems with
    bulbs blowing up and the bulbs are no longer avaialable. Ususally when
    you search for the model number and no bulb can be found, there is a
    reason.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-