Connect with us

Infiniband implementation

Discussion in 'Electronic Design' started by Quinn Johnson, Nov 11, 2004.

Scroll to continue with content
  1. Hello,

    I am currently trying to set up an Infiniband protocol on a Virtex 2 Pro.
    Therefore I use the dedicated multi gigabit transceivers (Rocket I/O s). My
    problem is that after finishing the link layer and testing the
    implementation in serial loopback mode I always get the error message from
    my testbench program that the synchronization gets lost.
    I already worked on several "standard" implementations and I often
    encountered false descriptions in the standard paper. Since the
    implementation is exactly based on the "Infiniband Architecture
    Specification Release 1.1" I wonder if there is already a mistake in the
    description? Or maybe there is another point that is not obvious I just
    overlooked?
    I would like to share my experience and knowledge with other developers who
    are also familiar with the Infiniband protocoll and its implementation to
    solve my problem. Any help is appreciated.

    Regards, Quinn
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-