Connect with us

Inexpensive Alarm Receiver

Discussion in 'Security Alarms' started by Bob, Feb 10, 2005.

Scroll to continue with content
  1. Bob

    Bob Guest

    Hi All-

    I am looking for an inexpensive receiver for alarm signals sent over
    the phone. This system is being used in a non burglar monitoring
    situation. We are using DSC 864 panels to send the signals. I know
    DSC and maybe others make a card for a PC, but it runs about $1,500.00,
    plus software. I can go this route if necessary, but I'd like to find
    something that is less money. All I need is an event log kept at the
    monitoring site.

    Bob
     
  2. Check ebay.
    I have a couple of recievers I'm selling but neither will take DSC.
     
  3. Mark Leuck

    Mark Leuck Guest

    Unless they are strange and rare receivers they should

    Check ebay.
    I have a couple of recievers I'm selling but neither will take DSC.
     
  4. DMP SCS-1 and a Radx 6500


     
  5. Mark Leuck

    Mark Leuck Guest

    DMP SCS-1 and a Radx 6500


    Well the 6500 will accept 4/2 and if I recall they did come out with a
    Contact ID compatible card, doesn't sound like you have that tho
     
  6. alarman

    alarman Guest

    Check ebay.
    I have a couple of recievers I'm selling but neither will take DSC.

    Why not??
    js
     
  7. no, 'cause i wasn't using CID back then..just modem format only. Then I closed my CS and put my stuff into my friends CS (a lot less headaches).
     
  8. The SCS-1 only took SDLC and the 6500 I only used the modem format at the time. I think I have a buyer finally for the 6500.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-