Maker Pro
Maker Pro

Inertial Measurment Unit (IMU) Selection !

Peter010

Oct 4, 2015
4
Joined
Oct 4, 2015
Messages
4
Hellow,

My case is about that I am going to launch a project which requires the use of a combined Accelerometer + Gyroscope. I have mad my researches on the internet, and found that they are listed under 6 axis IMU. The problem is I want the following specs, but don't know any piece that can fit the requirements: 1- very small (.4 mm * .4mm*.9mm) 2- does not need any programming, and ready to extract the data of motion directly. 3- Can deliver the data to an Arduino wirelessly. Kindly, I believe that you have the experience that qualify you to help me :)

Best Regards
 

Peter010

Oct 4, 2015
4
Joined
Oct 4, 2015
Messages
4
Thank you mate. I am checking the site. Ufortunatly,it does not have branches in UK !
 

Peter010

Oct 4, 2015
4
Joined
Oct 4, 2015
Messages
4
Kindly, what does g means in the context:

The MMA8452Q has user selectable full scales of ±2g/±4g/±8g

?
 

davenn

Moderator
Sep 5, 2009
14,254
Joined
Sep 5, 2009
Messages
14,254
g = acceleration due to earth's gravity = 9.81 m/s2


(dang @Ian ... I thought we had sub and super script here as click on buttons ?? ... any chance in adding it please :) )



Dave
 

Old Steve

Jul 23, 2015
734
Joined
Jul 23, 2015
Messages
734
g = acceleration due to earth's gravity = 9.81 m/s2

(dang @Ian ... I thought we had sub and super script here as click on buttons ?? ... any chance in adding it please :) )

Dave
I'll second the request for subscript and superscript buttons if it's at all possible. I'm forever doing it m a n u a l l y. :)

Edit: Strike-through would be nice, too. It can be used to good effect sometimes.
 
Last edited:

Old Steve

Jul 23, 2015
734
Joined
Jul 23, 2015
Messages
734
strikethrough is in the list ..... look under the insert dropdown icon,
Thanks Dave, I'd never noticed it. I always do that the hard way too. (And I use code tags regularly, so I should have seen it. :oops: )
 
Top