Connect with us

Induction Hob assistance

Discussion in 'General Electronics Discussion' started by dusseldorf101, Apr 2, 2012.

Scroll to continue with content
  1. dusseldorf101


    Dec 21, 2011
    Im currently undertaking a project but my knowledge of electronics (and google skills) has reached its limit. I am a Product designer and I'm designing an induction hob. What i really need help is with a circuit diagram of a control circuit to power an induction loop approximately 1m^2 with a field that extends to about 50mm above the cooking surface.

    Essentially i am trying to make an induction cooking kitchen surface. The idea being that it can be a multifunctional cooking/preparing/eating surface.

    Any help would be seriously appreciated! It doesn't necessarily need to have all the correct value of components etc just anything i can use as a basis would be incredible.

    Ps. This is for a university project not for commercial use or production.
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day