Maker Pro
Maker Pro

Induction heating, furnace question

S

SLC-173

Jan 1, 1970
0
I'm building an induction furnace to melt iron, steel and aluminum, I
found an old transformer I build a couple of years ago it output is
Alternating current 130A (amperes) 20V (volts) 50Hz I was wondering if
I can use it as the power supply for the coils, it power is about 2.6KW
and I need to be able to melt about 900g or 2 pounds of steel that's
about 114 cm^3 or half a cup.

Thanks
 
Top