Connect with us

increment a counter

Discussion in 'Electronic Basics' started by Darlapphood, Oct 27, 2005.

Scroll to continue with content
  1. Darlapphood

    Darlapphood Guest

    Followup on my original posting. I want to increment my counter with
    normally open output wire from a pnp sensor. When i activate the sensor i
    makes the counter increment furiously. I just want it to increment one tim
    each time the sensor is activated.
     
  2. John Fields

    John Fields Guest

    ---
    And, from that, we're supposed to divine what you're talking about?

    Yes, this _is_ sci.electronics.basics, where there are supposed to
    be no stupid questions, but the temerity of your post implies that
    we should all be acutely aware of your plight and respond to it with
    a solution with no more than you've given us to work with.

    Post a schematic somewhere. Give us a better verbal description of
    how you've got your problem circuit hooked up.

    "a normally open output wire from a pnp sensor" means just about
    nothing unless you describe the circuitry that's driving it so, if
    you want some help, you're going to have to get into more detail
    than you've given so far.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-