Connect with us

In car CD changer

Discussion in 'Misc Electronics' started by Dave Thompson, Oct 30, 2005.

Scroll to continue with content
  1. Hi all.... the trunk mounted Kenwood CD changer in my car has recently
    stopped working....power is getting to the unit and it is selecting CD's,
    but it will not read any CD in the changer. After cycling through all 10
    trays, "No Disc" appears on my stereo head unit. I'm guessing the laser may
    be at fault.... any ideas?
  2. JosephKK

    JosephKK Guest

    Yep, that sure enough sounds like a dead read laser. For crosscheck have
    some change CD's while you listen to it. If you hear it spin up and down
    the laser is dead. i have had a few CD players an recorders fail that way.
  3. Thanks for that Joseph...that was exactly what I didn't want to hear lol! Do
    you know if it would be cost effective to attempt a repair or should I cut
    my losses and buy a new unit?
    Thanks again.
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day