Connect with us

Impedance 50 ohm

Discussion in 'Electronic Basics' started by [email protected], Sep 24, 2007.

Scroll to continue with content
  1. Guest

    I am reading an avionics book this period.
    My question is why the signal generators and receivers have a standard
    impedance of 50 ohm.
    Thank you
  2. Phil Allison

    Phil Allison Guest

    ** Use Google - you boring twit.

    " why 50 ohms" will got you lots of info.

    ....... Phil
  3. David

    David Guest

    Ignore Phil, he has some anger issues to work out.
  4. Tom Biasi

    Tom Biasi Guest

    He may but he is correct this time.
    The OP could have found info very easily.

  5. amdx

    amdx Guest

    After a short search, I found a few lines from Phil working out his anger

    How vague is this functionally illiterate Brisbane ****,

    RF stands for Rabid Fuckwit.

    Beware Fuckwit - the cops can get your home address from you ISP in
    about ten minutes.

    See, you dumb ****%^&%#^*^

    One of us it the autistic toaster-boy from Summer Hill - so is the
    other one. So go **** yourself!!!!!!!!!??????!!!!!!!!!!

    You get my pompous, ignorant ass award

    Go eat your own droppings - Grease Monkey

    An honest debate is out of the question for those with only ape like

    Then let the maggots eat you

    This vile HT knuckle dragger must have one arm longer than the other.
    He keeps going round in ever smaller circles.

    But all here can see it - you asinine, autistic ****.

    Now ***Piss off *** - you asinine FUCKING LIAR !!!!

    Now go eat shit - mutherfucker !!!

    Just proves you're a bigger fuckwit than we already thought.

    No fucking " idiot savant - Rain Man " here - just a deviate, fuckwit
    Learn to read - fuckhed.

    Morgan is a pig ignorant POS .

    A typical brain dead recording engineer

    Note: this was a short, and is in no way meant to represent all of Phil's
    anger issues.

  6. Because 50 ohm coax has the best power transfer characteristics.

    Service to my country? Been there, Done that, and I've got my DD214 to
    prove it.
    Member of DAV #85.

    Michael A. Terrell
    Central Florida
  7. Rich Webb

    Rich Webb Guest


    Thanks for the summary. I've had PA in my killfile for ages and kinda
    miss reading the big lunk's opinions, in a strange, perverted way
    (much like, well, let's not go there). Actually amusing when they're
    collected together like that.

    Thinking about it, a "Best of PA" would make a dandy cookie file,
    wouldn't it? Hmmm... where'd I leave my google...
  8. Phil Allison

    Phil Allison Guest


    ** How does taking lines out of NG posts with no context prove anything ??

    Of course, it doesn't.

    You a must be a congenital moron to think it does.

    An " AM band DXer " is just about right.

    ....... Phil
  9. neon


    Oct 21, 2006
    It has to do with cable inpedances old TV 300 ohm cable then 75 ohms now all cableing are practcaly 50 or there about. actualy it is 47 ohms and 59 ohms or "0" INPEDANCE No cable has 50 ohms for all frequency at some point it ca be "0" unless it is cut top the right length. at 1/4 lenght max and at 1/2 min

  10. It would be interesting to see his archive after it want through a
    filter to remove his favorite words and phrases. It might be a whole 20
    KB file.

    Service to my country? Been there, Done that, and I've got my DD214 to
    prove it.
    Member of DAV #85.

    Michael A. Terrell
    Central Florida
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day