Connect with us

Illuminating Alpha Numeric Lcd With Leds

Discussion in 'LEDs and Optoelectronics' started by Donald Henderickx, Dec 19, 2016.

Scroll to continue with content
  1. Donald Henderickx

    Donald Henderickx

    10
    1
    Oct 12, 2015
    I have two Kenwood tm-255 that the incandescent have burned out.
    the first one I replaced the lamps with white clear rounded 3mm leds
    the second one with blue clear rounded 3mm leds.
    The first one the display reads reasonably well white
    The second one with the blue leds can only be viewed off axis either above
    or below the display.
    I believe that lcd crystal displays have a polarized filter to make them visible.
    Are my leds polorized?? (wrong polorization)
    Any help will be appreciated

    wa9ylp
    Don Henderickx
     
  2. Harald Kapp

    Harald Kapp Moderator Moderator

    11,794
    2,749
    Nov 17, 2011
    That would be very special LEDs. Standard LEDs are not polarized.
    You may suffer from interference of the light waves within the LCD's structure - just a guess.
    I recommend you swap the blue LEDs for white ones.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-