Connect with us

IGBT problems

Discussion in 'General Electronics Discussion' started by tommo2000, Dec 28, 2013.

  1. tommo2000

    tommo2000

    1
    0
    Dec 28, 2013
    I am trying to use an IGBT, IRG4PC40UDPbF, to drive a motor however in the ON state it seems to have very high impedance approx 40 kOhm despite me putting 20 V on the gate.
    Any ideas what I might be doing wrong or what I should test?

    Thanks in advance
     
  2. Arouse1973

    Arouse1973 Adam

    5,164
    1,078
    Dec 18, 2013
    Can you supply a diagram of how its connected and how you are measuring the resistance.
    Thanks Adam
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-