Connect with us

igbt gate driver ckt help needed

Discussion in 'General Electronics Discussion' started by mit_prem_mi247, Dec 7, 2011.

Scroll to continue with content
  1. mit_prem_mi247

    mit_prem_mi247

    1
    0
    Dec 7, 2011
    i have infineon igbt
    FF300R12KS4
    need its gate driver ckt for 75m khz 700 amp 75 to 100V output
    can any one help me on that
     
  2. GonzoEngineer

    GonzoEngineer

    321
    2
    Dec 2, 2011
    Infineon has plenty of applications information on their website for gate drive circuits.

    (Check out the Infineon "ICE Driver" information.)

    If you are trying to design your own, their are many pitfalls that can damage the device.

    (Too many to list here, as I am heading to work shortly.)

    An ideal gate driver circuit should also measure saturation to detect short circuit conditions so you don't damage the device. You also need to insure proper switching parameters,
    because you can easily sent the device into thermal runaway and let the smoke out.:(

    Also, be aware that 700 Amp switching can be very problematic regarding the commutation spikes on the DC link on turn off. If you don't have proper snubbing, or if you have high inductances on the DC link, you will have turn off spikes that can be as high as 5 times the DC input voltage!

    Are you in the U.S.??? I have just what you need in my surplus inventory, and would gladly give it to you for free if you can PM me with more information on your application and needs.
     
    Last edited: Dec 8, 2011
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-