Connect with us

Identifying equivalent for surface mount diode from photo

Discussion in 'Troubleshooting and Repair' started by Narna Peel, Sep 16, 2017.

Scroll to continue with content
  1. Narna Peel

    Narna Peel

    3
    0
    Sep 16, 2017
    Hi
    Please would someone advise me on an axial replacement for the surface mount diode shown in this photo.
    Also would you confirm that the resistors shown in the photo can be replaced with an axial 470 ohm resistors.
    Thank you
    Narna

    Diode.jpg
     
  2. davenn

    davenn Moderator

    13,657
    1,888
    Sep 5, 2009
    The resistors are 47 Ω NOT 470 Ω
    470Ω = 471
     
  3. kellys_eye

    kellys_eye

    4,275
    1,146
    Jun 25, 2010
    The diode can be replaced with a standard 1N4004 and any axial resistor will replace the fixed values SMD device (check the wattage - can't make out what size package those resistors are but the equivalent may be 1/4 watt or 1/2 watt...)
     
    Narna Peel likes this.
  4. 73's de Edd

    73's de Edd

    2,922
    1,235
    Aug 21, 2015
  5. kellys_eye

    kellys_eye

    4,275
    1,146
    Jun 25, 2010
    Change 1N4004 to UF4004 then :D
     
    Narna Peel likes this.
  6. Narna Peel

    Narna Peel

    3
    0
    Sep 16, 2017
    Brilliant, thank you.

    kellys_eye, would agree with davenn that the resistors are actualy 47 ohms and not 470 ohms as i thought?
     
  7. davenn

    davenn Moderator

    13,657
    1,888
    Sep 5, 2009

    please DONT insult me
     
    Narna Peel likes this.
  8. (*steve*)

    (*steve*) ¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd Moderator

    25,412
    2,780
    Jan 21, 2010
    The fact that nobody has contradicted Dave is probably a good indication.
     
    Narna Peel likes this.
  9. Narna Peel

    Narna Peel

    3
    0
    Sep 16, 2017
    Ha ha, sorry Dave, I did not mean to insult you.
    I appreciate your knowledge, it has just saved me a lot of time.
     
  10. kellys_eye

    kellys_eye

    4,275
    1,146
    Jun 25, 2010
    If my opinion is that highly valued :p and it winds @davenn up a little then yes, it's a 47Ω resistor!
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-