identifying a three pins component S882-3J-P

[Matthieu Benoit]

Hello,
Could you help me trying to identify this transistor, triac or SCR?

it is marked S882-3J-P
it is placed top left of a board
http://cjoint.com/?kpautbTC4Y component side
http://cjoint.com/?kpnLIV0CE0 solder side
the purpose of this little card is to control a 12 Volts Lamp from a 12
Volts input with a small microphone.
thank you for any help
Matthieu

 

[[email protected]]

Any logo on it?

 

[Matthieu Benoit]

Unfortunately there is no logo on it .

 

[[email protected]]

Could be 2SD882
(manufacturered by Fairchildsemi, NEC, etc.)

 

[Roger Hamlett]

Could be 2SD882
(manufacturered by Fairchildsemi, NEC, etc.)

2SD882, is a standard Japanese transistor nomenclature. NPN bipolar, legs
organised as 'E, C, B' reading from left to right. Vcbo 40v, Vceo 30v, Ic
3A, Ft 90MHz, Hfe 160. Any data book from about 10 years ago, should list
it.

Best Wishes

 

[Matthieu Benoit]

2SD882, is a standard Japanese transistor nomenclature. NPN bipolar, legs
organised as 'E, C, B' reading from left to right. Vcbo 40v, Vceo 30v, Ic
3A, Ft 90MHz, Hfe 160. Any data book from about 10 years ago, should list
it.

Best Wishes

Thank you very much , seems you are both right -
Thanks,
Matthieu