Connect with us

Identify this component please.

Discussion in 'Datasheets, Manuals and Component Identification' started by stoveitin, Jul 3, 2013.

Scroll to continue with content
  1. stoveitin


    Jul 3, 2013

    Im in the middle of repairing and playing with this board but cant identify this component I think its some sort of filter its in line with the audio circuit to an op amp input...

    I have attached a photo of it to this post with the component circled in red.

    Its hard to read the information on it .. looks like .. 2a1u3x .. maybe and has two leads too it.

    Cheers for any help.

    Attached Files:

    Last edited: Jul 3, 2013
  2. GonzoEngineer


    Dec 2, 2011
    It is a capacitor.
  3. stoveitin


    Jul 3, 2013
    ahh really I been googleing capacitors for ages trying to identify it, I cant make sense of the markings on it and its marked on the board as a X not as C1 for example.
  4. stoveitin


    Jul 3, 2013
    Guess the end of the markings could really be 103x 10000pf X tolerance ?
  5. (*steve*)

    (*steve*) ¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd Moderator

    Jan 21, 2010
    It looks like a 0.1uF greencap (if your reading is correct). It's a capacitor, and it may be used in the filtering of an audio signal, but unless you can trace the wiring around it there is no way to know what sort of filter it is part of (if indeed it is part of a filter)

    Could that letter be a "K"?

    See here.
  6. stoveitin


    Jul 3, 2013
    Okay yea I see now cheers for your help on something I probably should of recognised easier lol.

    2A = 100volts
    103= 0.01 uf
    x could possibly be a k its pretty worn and hard to read which would just be the tolerance.

    I have worked the whole circuit out I have attached a picture of where abouts it is in the circuit but im happy now :).

    Thx for your help.

    Attached Files:

Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day