Connect with us

Identify part

Discussion in 'Troubleshooting and Repair' started by Africangrey, Jul 27, 2017.

Scroll to continue with content
  1. Africangrey

    Africangrey

    5
    1
    Jul 12, 2017
    Can anyone help with identifying this part?

    I`m thinking it`s a Thermistor (going by the schematic symbol) but can`t work out the specs 26V 1608 ?

    It`s reading as open.

    Capture.JPG
    THANK YOU

    Phil
     
  2. davenn

    davenn Moderator

    13,618
    1,882
    Sep 5, 2009

    Hi Phil

    probably one of the variations of a MOV Metal Oxide Varistor
     
  3. 73's de Edd

    73's de Edd

    2,900
    1,232
    Aug 21, 2015
    Sir Africangrey . . . .aka Phil . . . .

    Unless it’s being a SECURITY breach / or / compromise . . . why don’t ye give us ye olde brand and model number of your unit ? possibly View Sonic ?

    And . . . assuredly . . . . you’re opening the door to the WRONG parrot cage, as this unit should be good.

    It`s reading as open.

    By utilizing supplied referencing, you can see that the unit only avalanches and starts any consequential conducting at up about the 26VDC level, or if using RMS AC, only about 18-20 VAC should show both the node peaks clipping.

    Power Supply Varistor.png

    73’s de Edd
     
    Last edited by a moderator: Jul 28, 2017
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-