Connect with us

Ideal Diode in LTSpice

Discussion in 'General Electronics Discussion' started by Sukhdeep, Nov 11, 2014.

Scroll to continue with content
  1. Sukhdeep

    Sukhdeep

    21
    0
    Sep 4, 2014
    Hi,

    On opening the LTSpice, there comes a bar on the top where the Components are placed (inductor, capacitor etc). I Wonder that the diode symbol given on that bar symbolises ideal diode? If not, then is there any way to include ideal diode in LTSpice?

    Thanks
     
  2. Harald Kapp

    Harald Kapp Moderator Moderator

    11,522
    2,654
    Nov 17, 2011
    The standard "D" diode seems to model a diode with some typical parameters and exponential I vs V characteristic, as you can easily check doing a simulation.
    This is not an ideal diode.

    Look here , post by John Larkin from Sun Apr 04, 2010 5:44 pm for a quick setup for an (almost) ideal diode.
     
  3. LvW

    LvW

    604
    146
    Apr 12, 2014
    I am not quite sure if the term "ideal diode" is a commonly agreed "definition".
    Therefore, it would be helpful if YOU could specify the properties of the diode model you want (for example: Threshold voltage at V=0 or V>0?)
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-