Maker Pro
Maker Pro

ID this connector?

docb

Feb 11, 2010
131
Joined
Feb 11, 2010
Messages
131
I see these connectors in a lot of devices, but not sure what it is. Any ideas?
I'm looking for the large 8 pin male, and the small 2 pin power connector on the right.

connector.JPG
 

Raven Luni

Oct 15, 2011
798
Joined
Oct 15, 2011
Messages
798
They are known as headers or header pin connectors. If they have edges that only fit together in 1 direction they are said to be polarised.
 

docb

Feb 11, 2010
131
Joined
Feb 11, 2010
Messages
131
Yes, but what specific ones so I can order?

(MTA, SL156 etc)
 

CocaCola

Apr 7, 2012
3,635
Joined
Apr 7, 2012
Messages
3,635
You need to take measurements (pin spacing, pin size, wire gauge, outside dimensions etc.) and look at the profiles of the connectors...

Then start comparing the above data to the offerings from

AMP/Tyco
Molex
JST
3M

I'm sure checking the inventory of those 4 companies will pop multiple cross substitution connectors...
 
Top