Connect with us

Icom M-601 connectors?

Discussion in 'Boat Electronics' started by Mika the Spamkiller, Sep 26, 2005.

Scroll to continue with content
  1. Making cable for connecting my GPS to Icom M-601 radio. Icom manual
    shows pins for data in and out, external speaker etc. Unlike with
    computer connectors, pins seem not be numbered, so there is some
    confusion. I am unsure whether the picture in the manual is of the
    connector on back side of the radio or cable. Wrong quess, and my
    GPS data output will be connected to external speaker output of the
    radio... Anyone with some info?

    Mika
     
  2. TomS

    TomS Guest

    The picture in the manual shows the solder side of the connector.

    Regards,
    TomS
     
  3. Thanks for info. Maybe I just didn´t read the manual carefully.

    Mika
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-