Connect with us

I want to make a microphone/ headset controller for my pc

Discussion in 'Microcontrollers, Programming and IoT' started by MSIPoweredGamer, Dec 4, 2020.

Scroll to continue with content
  1. MSIPoweredGamer

    MSIPoweredGamer

    2
    0
    Dec 4, 2020
    So I have been doing research for a long time and cant seem to find anything. I want to make a controller that I can connect my computer, my microphone, and my headphones to. I want to be able to control Mic on/off and mic volume along with controlling bass/treble/volume for the audio out put for head phones, Without hearing the mic or having the headset signal go back to the pc. I would like to keep the left right signal for the headphones but that is not needed. Dose anyone know how to make a circuit or code for this using switches potentiometers etc. (I am ok with having two pc connections for mic in and audio out if needed) I have some very very basic coding experience but its been a while. Thank you in advance!

    note: If something like this exists online for ~75 or less please tell me Thank You. The Picture is Kind of my idea (please excuse the bad MS paint skills). Wiring project example.PNG
     
    Last edited: Dec 4, 2020
  2. Nanren888

    Nanren888

    370
    95
    Nov 8, 2015
    I guess the normal answer is either a usb headset or analogue components + software to control every aspect of the sound, on off, volume, tone controls.
    .
    Seems most of what you ask for is provided by the sound hardware of the computer and software controlled.
    .
    If you have a need for the controls being hardware, you might want to search for small sound mixers. There are many sorts available, with a variety of inclusions, mic preamps, mixers, tone.
     
  3. MSIPoweredGamer

    MSIPoweredGamer

    2
    0
    Dec 4, 2020
    Thank You for your help
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-