Connect with us

I need help using a HP 1615A logic analyzer

Discussion in 'Electronic Equipment' started by [email protected], Oct 15, 2006.

Scroll to continue with content
  1. Guest

    I bought this used on eBay. I have bought a manual and logic clips for
    it. I have tried to use it, but the Trace mode never recognizes the
    'search word' I have set. I am wondering if I am doing something wrong
    or if it is actually defective. I have set the probe threshold levels
    to variable and have the trigger voltage at 3.9 volts on a 5 volt
    board. I never get a trigger, even though the logic probe shows my
    test points to be pulsing. I get a warning that I have no trigger.
    Can someone give me some pointers on this piece of equipment, please?
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day