Connect with us

I have dji mavic pro gimbal and camera help me wiring it so that i could use it as separate camera

Discussion in 'Sensors and Actuators' started by Giorgikakha, Apr 14, 2021.

Scroll to continue with content
  1. Giorgikakha

    Giorgikakha

    3
    0
    Apr 14, 2021
    3C8F6E2F-A2DD-48A5-9D8F-6252210DFF78.jpeg
     
  2. Martaine2005

    Martaine2005

    3,336
    912
    May 12, 2015
    Hi, do you want to remove the camera from the gimball?
    It depends whether the cameras supporting electronics is in the housing or integrated with the gimbal electronics.
    Check how many wires are coming from the camera. Generally, 3 wires are power and video, 4 wires are power, video and audio. I assume the camera housing doesn't pan and tilt, the gimbal does this?.

    Martin
     
  3. Giorgikakha

    Giorgikakha

    3
    0
    Apr 14, 2021
    No i dont want to remove the canera i want to use it all as gimbal and camera . Is therr any kind of board which connects to this pins ?
     

    Attached Files:

  4. Martaine2005

    Martaine2005

    3,336
    912
    May 12, 2015
    I dare say they are proprietary and only DJI use them.
    You could count the pins and measure the pin spacings along with the connector dimensions. That may give you a start for an internet search.
    But I'd probably find a dedicated forum for drones where people hack and pull them a part.
    Other members here on EP May have better answers for you.

    Martin
     
  5. Giorgikakha

    Giorgikakha

    3
    0
    Apr 14, 2021
    Ty martin maybe some 1 can help me with this kind of problem
     
  6. Martaine2005

    Martaine2005

    3,336
    912
    May 12, 2015
    I must say though, they do look very similar to iPhone 5 connectors. Obviously not.
    Have you got the drone?, you could possibly trace the important connections. Leaving all ancillary connections out.

    Martin
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-