Maker Pro
Maker Pro

I.C. identification

ahmad hadrab

Jun 14, 2018
1
Joined
Jun 14, 2018
Messages
1
could anybody help me to identify the following I.C. as I couldn't fiend anything about it in the net.
Capture1.PNG Capture1.PNG Ahmad Hadrab
 

kellys_eye

Jun 25, 2010
6,514
Joined
Jun 25, 2010
Messages
6,514
Your picture isn't very useful - closer detail required - but information on the actual board/equipment itself would also help.

It may be that it is an ASIC of some sort in which case getting a spare might not be easy.
 
Top