Connect with us

HP1740A Repair

Discussion in 'Electronic Repair' started by ronspencer, Mar 6, 2005.

Scroll to continue with content
  1. ronspencer

    ronspencer Guest

    Traces comes on full bright and intensity control has little affect
    Manual indicates ther should be .4V on pin 3 of U1 but I get -.61V
    Pin 7 reads -.176V which baffles me as the schematic shows 3 and
    shorted together. My thinking is that U1 is bad

    Any thoughts

    Thanks much

    Raleigh, N
  2. N Cook

    N Cook Guest

    According to my 1740A manual and U1
    pin 7 is +15V and pin 3 is non-inv i/p

    electronic hints and repair briefs , schematics/manuals list on
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads
Electronics Point Logo
Continue to site
Quote of the day