Maker Pro
Maker Pro

HP DeskJet 900 series repair ....Help

My HP deskjet 932c just bit the dust. No lights or any indication
that it is receiving power.

Prior to this the color photos that I would print were darker than
normal. During this time period the printers power cord was unplugged
and plugged back in while the printer was off. The next time I started
the printer it would not come on. I suspect that a MOV or something
similar went out when the printer was unplugged.


I have dis-assembled the printer to a point were the next step is to
remove the power supply circuit board. The circuit board is contained
within a black plastic enclosure that I can't figure out how to
remove. It must be removed before the circuit board. There are tabs
on the black plastic that hook around the metal framework, but the tab
hooks are 1/4 inch long and I see no way of flexing this plastic
without breaking it. I must be missing the secret to removing this
enclosure. I am hoping someone has gone through this before and can
give me the hint that I am looking for.
 
H

Homer J Simpson

Jan 1, 1970
0
I have dis-assembled the printer to a point were the next step is to
remove the power supply circuit board. The circuit board is contained
within a black plastic enclosure that I can't figure out how to
remove.

Google (fix your own printer)








--
 
Top