Connect with us

HP 8116A Service Manual with Schematics

Discussion in 'Electronic Equipment' started by countrytech, Apr 27, 2009.

Scroll to continue with content
  1. countrytech

    countrytech Guest

    Hello!

    I have a couple of old HP8116A function generators that need repair
    and I have not been able to locate a Service manual with schematics.

    While looking through previous postings in this group, I noticed that
    "JW" has a copy of the service manual with schematics. He had
    temporarily placed it on a web site as a pdf file for another group
    member to download it.

    JW, could you please do that again so I could download the 8116
    manual? I would GREATLY appreciate it!

    Thank You
    Steve
     
  2. countrytech

    countrytech Guest

  3. countrytech

    countrytech Guest


    Thanks for the link, but the Agilent site manual doesn't have any
    schematics in it. Member "JW" has a pdf manual that is 10MB in size
    and includes the schematics.

    Steve
     
  4. JW

    JW Guest

    Is your email address valid?
     
  5. Baron

    Baron Guest

    I would appreciate a copy if you would be so kind.
     
  6. JW

    JW Guest

    To all - check your mail.
     
  7. jasoneyes01

    jasoneyes01

    1
    0
    Apr 3, 2010
    JW
    I have an E41 error on my 8116A. Could you email me a copy of the 10mb version of the manual. Agilents website gave me a manual with a nag of worms. Thanks.


    JB
     
  8. lysohu

    lysohu

    6
    0
    May 13, 2010
    Hi JW I'm a Chanese ,




    Hi JW , Would you please send a copy of HP8116a sch. to me .I want to repair my HP8116A thanks My email: [ly.agva_AT_gmail.com]
     
    Last edited: May 13, 2010
  9. PeterH

    PeterH

    4
    0
    Aug 25, 2010
    JW: If you read this, I would also be interested in a copy of the HP/Agilent 8116A manual with schematics. It would help alot trying to solve what seems to be standard problems on the 8116A generator (in my case the E31 error code, and of course the battery:)).

    If possible please drop me an mail...


    Best regards
    Peter, Sweden
     
  10. lysohu

    lysohu

    6
    0
    May 13, 2010
    Thank you


    Hi Peter
    Thanks for your reply, some one sent it to me in the past....
    Best Regards
    Liyang, China
     
  11. PeterH

    PeterH

    4
    0
    Aug 25, 2010
    Hi Liyang, do you still have the document/schematics for the HP8116A? Is it possible for you to send it to me also? I would really appreciate it :)

    Best Regards
    Peter
     
  12. lysohu

    lysohu

    6
    0
    May 13, 2010
    yes ,I keeped! Mey I have your email address.. I can send it pass to you
     
  13. PeterH

    PeterH

    4
    0
    Aug 25, 2010
    Hi Liyang, thanks for your super quick response :D Please send it to "write.me_at_dyds_dot_se" (hopefully my mailbox can accept the size of the document, also you need to replace _at_ with @ and _dot_ with . ).

    Thanks again!

    /Peter
     
  14. lysohu

    lysohu

    6
    0
    May 13, 2010
    OK ,I sent
     
  15. lysohu

    lysohu

    6
    0
    May 13, 2010
    if you have not received my email with HP8116 service pdf. pleace contact me"ly.agva at gmail dot com"
     
  16. PeterH

    PeterH

    4
    0
    Aug 25, 2010
    Hi Liyang, I have now recieved the information, thanks! (the mail got stuck in my spam filter so I did not see it first :mad:)

    This is what I found regarding E31 code so far:

    E31
    The Timing IC U300 is unable to generate pulses of 5 ms and 25 ms.
    Possible faults:
    Width DAC A2: U13, U5, U17
    Control mode selector Al: U152
    VCO (Slope) IC Al: U201, Q220
    Error feedback Al: U301, U302, Q302
    Refer to Chapter 10.3 and Chapter 10.5.


    Now I have something to go on, thank you very much!
     
  17. Guest

    Sorry, hat I buzzer you. I habe also a HM8116 with E51 and need the schematics. I hope you can sehr them Tod me.
    Thank you
    Manfred Bruck
     
  18. JW

    JW Guest

    http://artekmanuals.com/

    An excellent scan and only $5. Well worth the money.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-