Maker Pro
Maker Pro

HP 16505A cable

G

gwgjr30

Jan 1, 1970
0
Can anyone tell me what the correct cable is to connect the HP 16505A
protocol analyzer to a 16500C/16500B+H. I haven't been able to find an
HP part number yet in the documentation that I've found. I also don't
know if the cable is specific to this application or also used
elsewhere.

Thank You,
Gary
 
K

Keyser Soze

Jan 1, 1970
0
gwgjr30 said:
Can anyone tell me what the correct cable is to connect the HP 16505A
protocol analyzer to a 16500C/16500B+H. I haven't been able to find an
HP part number yet in the documentation that I've found. I also don't
know if the cable is specific to this application or also used
elsewhere.

Thank You,
Gary
A 50-pin SCSI-2 cable should work.

This is what you need to connect an external CDROM to the 16505A.

The bigger connector is used to connect to the 16501 expansion box.
 
G

gwgjr30

Jan 1, 1970
0
Thanks! I knew the 16501 connects through a 64 pin SCSI connector, but
I wasn't sure about the 16505.

Thanks Again,
Gary
 
Top