Connect with us

How to wire a relay TX2-L2-3V

Discussion in 'General Electronics Discussion' started by the_0utsider1, May 2, 2013.

Scroll to continue with content
  1. the_0utsider1

    the_0utsider1

    4
    0
    May 2, 2013
    this is a Panasonic dpdt relay. The 3V means it only takes 3v to switch right?
    Looking at the doc page 8, it says pins 1 - 12 are the 3V+- to switch the relay.

    Well, i apply 3 and i inreased it to 5v and it doesnt switch.
    I tried the same switch minus the locking feature with the same results.
    Can somebody please help me? Am i doing something wrong or are the relays i got bad??
     
  2. davenn

    davenn Moderator

    13,838
    1,952
    Sep 5, 2009
    Hi and welcome to the forums :)

    can you post a link to the datasheet please
    just so we know you are reading it correctly :)

    Dave
     
  3. the_0utsider1

    the_0utsider1

    4
    0
    May 2, 2013
    BTW, i tried a model with the locking feature and one without both i cannot get the switch to do anything.
     
  4. CDRIVE

    CDRIVE Hauling 10' pipe on a Trek Shift3

    4,960
    652
    May 8, 2012
    Did you check the coil with an Ohmmeter?

    Chris
     
  5. Rleo6965

    Rleo6965

    585
    9
    Jan 22, 2012
    First time to know about this kind of relay. It seems relay coil have polarity for a certain function.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-