Connect with us

How to take apart Compaq 2103 laptop

Discussion in 'Electronic Repair' started by BobH, Mar 24, 2007.

Scroll to continue with content
  1. BobH

    BobH Guest

    Hi. I have a Compaq Presario 2103 laptop that won't charge. I think
    the problem is in the power jack. I have tried taking it apart to
    solder the jack, but apparently there are two screws in the middle of
    the computer that can't be accessed from the bottom or top. I think I
    see the bottom (not the head) of one screw beneath the plastic around
    where the memory plugs in. I think the heads of these two screws must
    be under the spacebar or under something else that is under the
    spacebar. Do you have any suggestions?

  2. Wes

    Wes Guest

    See if the keyboard can be unclipped from the top. My Toshiba has a
    decorative section at the base of the keyboard that unclips to allow the
    keyboard to be lifted out.

  3. Jim Land

    Jim Land Guest

    You need the factory service manual, which has step by step instructions.
    Download here (6MB PDF):
  4. BobH

    BobH Guest

    Thank you very much, Jim. This looks very helpful. It may convince me
    that I shouldn't try it, but even if I don't use the manual for this
    repair I'll probably find it useful in the future.
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day