Connect with us

How to Program the PIC16f57

Discussion in 'Microcontrollers, Programming and IoT' started by jwflammer, May 4, 2010.

  1. jwflammer

    jwflammer

    1
    0
    May 4, 2010
    I have a Sure Electronics Demo board for dot-matrix LED 6416&6432 and it has a PIC16f57 i want to reprogram it to change the displayed information to have it say what i want it to the board has 6 pins to work with NC, PGC, PGD, GND, +5V, and MCLR how do i use these pins to program the chip i'm thinking i should use hyper terminal for Linux to program it and build a make shift com1 cable connector but im lost can any one point me in the right direction.


    thanks John
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-