Connect with us

How to measure the power of antenna (RF)

Discussion in 'Radio and Wireless' started by thanhvu94, Oct 1, 2016.

Scroll to continue with content
  1. thanhvu94

    thanhvu94

    3
    0
    Oct 1, 2016
    Hello,

    I'm doing a project about aquatic drone and we have 2 antennas on it. We want to measure the power of the two antennas and compare with each other to find out whose signal is stronger. Can you give me some ideas about this? (circuit, website, books...)

    Thank you so much
     
  2. Arouse1973

    Arouse1973 Adam

    5,164
    1,080
    Dec 18, 2013
    How do you think we can answer that with so little info. Give us all the details of your project.
    Adam
     
  3. davenn

    davenn Moderator

    13,591
    1,872
    Sep 5, 2009
    antennas don't have/produce power

    As Adam responded tell us much more


    but a field strength meter is usually used to determine radiated signal strength
     
    Last edited: Oct 2, 2016
  4. (*steve*)

    (*steve*) ¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd Moderator

    25,391
    2,775
    Jan 21, 2010
    Or if it's the received signal strength you want to measure, provide a fixed gain to both, and compare the amplitude of the signals.

    Assuming the antennas have the same impedance, the amplitude week be proportional (not directly) to power. For received signed it's normally about the amplitude (possibly in uV) than the received power (possibly in uW) anyway.
     
  5. thanhvu94

    thanhvu94

    3
    0
    Oct 1, 2016
    @adam, davenn: Sorry for my confusing question. Just like davenn mean, my professor says that the idea of our project is just to measure and compare the signal strength from 2 antennas to choose which one receive better signal (We will control the aquatic drone from a riverbank). But my team is new to RF so we don't have much idea to discuss.

    Thank you.
     
  6. thanhvu94

    thanhvu94

    3
    0
    Oct 1, 2016
    Thank you for your reply, can you be tell me which tool/circuit/module we can possibly use to measure that?
     
  7. (*steve*)

    (*steve*) ¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd Moderator

    25,391
    2,775
    Jan 21, 2010
    Is this to compare antennas and then decide which one to use, or will the device have multiple antennas that it will dynamically chose from?

    If the former, you could simply try them one by one and see which one allows reliable control at the longest range.
     
    Arouse1973 likes this.
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-