Connect with us

How to make a RLC circuit with Op-amps?

Reply to Thread

Discussion in 'General Electronics Discussion' started by maj1c, Sep 17, 2011.

Scroll to continue with content
  1. Sep 17, 2011 #1
    maj1c

    maj1c

    2
    0
    Sep 17, 2011
    Hello,

    I want to know if it is possible to make an equivalent circuit of the simple RLC circuit attached using Operational Amplifiers.

    I want to represent the voltage signal shown, but I don't know how.
     

    Attached Files:

  2. Sep 17, 2011 #2
    duke37

    duke37

    5,364
    771
    Jan 9, 2011
    It depends on what you want to do!

    Op-amps can be used to substitute for inductors but using more capacitors. I have never done it but have seen it described in "Electronic Filter Design" by Arthur B. Williams, there is a later book by Arthur B Williams and Fed J. Taylor also.

    The circuit you show would need its response calculated and could be simulated with a single op-amp band pass filter.
     
  3. Sep 18, 2011 #3
    maj1c

    maj1c

    2
    0
    Sep 17, 2011
    Thank you for the information, I think I will look for more information about the band pass filter you mention.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Op Amps

  2. Op Amps

  3. op amps?

  4. How to connect op amps in parallel

  5. OP AMPS!!!!

  6. op-amps with high gain

  7. Ramping signals with op amps?

  8. How to calculate how many amps does a circuit need?

Loading...
Electronics Point Logo
Continue to site
Quote of the day

“”

-