Connect with us

How to implement message display that will update through Usb from a Pc

Reply to Thread

Discussion in 'Microcontrollers, Programming and IoT' started by nichips, Dec 28, 2013.

Scroll to continue with content
  1. Dec 28, 2013 #1
    nichips

    nichips

    2
    0
    Dec 28, 2013
    Hi,
    Can somebody help me on the best way to implement a message display that can be updated through Usb from a Pc.
    The MCU is PIC18F4550. If possible i would appreciate a sample code using MikroC
    Thank you
     
  2. Dec 28, 2013 #2
    p.erasmus

    p.erasmus

    60
    0
    Jul 18, 2013
    I would advice you to look in LibStock
    http://www.libstock.com/ under USB you could use any of the USB protocols all are supported in mikroC with examples.
    propably HID would be the easy one for you to start with in the compiler instalation folder under examples you will see example code how to use HID USB once you have the data from the PC in the mcu you could update the display easily
     
  3. Dec 28, 2013 #3
    nichips

    nichips

    2
    0
    Dec 28, 2013
    Thank You p.erasmus,
    That was helpful. however let me use it and see how it goes
     
  4. Dec 28, 2013 #4
    p.erasmus

    p.erasmus

    60
    0
    Jul 18, 2013
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Reading data from ADC to PC through USB

  2. How to Implement a USB or Bluetooth Interface

  3. How to implement "syntax sensing"

  4. Gsm led message board display

  5. How to control a microcontroller through a wireless signal?

  6. code to control DC motor through PC

  7. Flowchart of a moving message display program using PIC

  8. How to control Arduin using STONE HMI to implement a beauty instrument project

Loading...
Electronics Point Logo
Continue to site
Quote of the day

“”

-