Connect with us

How to control 5v Relay with 2 way switch

Reply to Thread

Discussion in 'General Electronics Discussion' started by Prashant Sharma, Jun 20, 2017.

Scroll to continue with content
  1. Jun 20, 2017 #1
    Prashant Sharma

    Prashant Sharma

    1
    0
    Jun 20, 2017
    Dear Friends,

    I've Red and Green LED light at home and default position red light are ON with relay (NO),5v Relay which is connected to system and when system had given the commend the relay had change the position (NO - NC) and Green LED light are ON.

    Now that things are working but i've need the second option which can change the LED light manually through switch.. I did not find any solution about that.. looking forward to get he solution from genius.

    Thanks in Advance...
    Prashant
     
  2. Jun 20, 2017 #2
    BobK

    BobK

    7,682
    1,686
    Jan 5, 2010
    You can use a DPDT switch to exchange the NO and NC outputs of the relay before going to the lights. There may be a simpler solution, but this is what came to mind.

    Bob
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Ten way relay switch required.

  2. Convert 2 way switch/ splitter

  3. 5v to illuminated switch - help

  4. Momentary Toggle Switch - 5V Relay Board help!

  5. Safest way to switch 240VAC

  6. how to convert analog output voltage (3V to 5V and 4.6V to 5V) to (0V to 5V)

  7. rs flip flop to run 5v relay

  8. SainSmart 5V 4 Channel Solid State Relay momentary switch

Loading...
Electronics Point Logo
Continue to site
Quote of the day

“”

-