Elecbegginner
- Mar 24, 2013
- 103
- Joined
- Mar 24, 2013
- Messages
- 103
I have a motor witch i will use to check if a card is working , but for that the card uses a 12 A triac .
The motor that i got is a monophased 220 V one just like the original but this one is a bit smaller , so i am worried about that .
The motor contains a STATOR with two coils shielding a ROTOR , from the two coils i goes one wire from each coil , the two wires are fed by the output of the card , and actually its the one that i made a thread about it long time ago :
https://www.electronicspoint.com/another-circuit-analyse-malaxor-speed-variator-t261502.html
Please how to calculate the Intensity of current delivered by this MOTOR ???
The motor that i got is a monophased 220 V one just like the original but this one is a bit smaller , so i am worried about that .
The motor contains a STATOR with two coils shielding a ROTOR , from the two coils i goes one wire from each coil , the two wires are fed by the output of the card , and actually its the one that i made a thread about it long time ago :
https://www.electronicspoint.com/another-circuit-analyse-malaxor-speed-variator-t261502.html
Please how to calculate the Intensity of current delivered by this MOTOR ???
Last edited:
