Connect with us

How to Address Device behind PCI Bridge
Reply to Thread

Discussion in 'General Electronics' started by oxy, Nov 26, 2003.

  1. Nov 26, 2003 #1
    oxy

    oxy Guest

    Hi!all~ ~
    I have a question about "how" to address device behind PCI Bridge.
    The point is that i use AHB-PCI bridge in PCI add-in card-
    and i don't know how to transmit data to else device.
    (ex,Main Memory,other device..etc)
    First,I know PCI can transmit data to device in Type1,but i am weak in
    that how can i do to know/get device to porcess data transfer behind
    PCI bridge?
    I'm confused several day.

    Regards.
     
  2. Nov 27, 2003 #2
    oxy

    oxy Guest

    any body know?
    my question is that i want to know embedded system how to transfer
    data to mb device through PCI bus.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. PCI-PCI Bridge

  2. Bridge to attach a PCI device to a PC-card socket?

  3. How to address a moderator

  4. How to Connect to H Bridge?

  5. How to balance the bridge?

  6. How to know an oscilloscope's MAC address?

  7. How to address ( serial and parallel) eeprom

  8. How to setup trendnet bridge

Loading...
Electronics Point Logo
Continue to site
Quote of the day

“”

-