Connect with us

how it works, how to calculate the output

Discussion in 'General Electronics Discussion' started by sharimin, Dec 19, 2013.

  1. sharimin

    sharimin

    8
    0
    Dec 17, 2013
    pls help me.

    how it works, how to calculate the output
    Clipper cct.JPG
     
  2. BobK

    BobK

    7,598
    1,641
    Jan 5, 2010
    To calculate the output, read the marking on the part.

    Bob
     
  3. sharimin

    sharimin

    8
    0
    Dec 17, 2013
    sorry bob, i dont understand..

    which mark? read what??
     
  4. mursal

    mursal

    75
    0
    Dec 13, 2013
    The output voltage for this regulator is 2.5Volts regardless of the input voltage (within limits), as long as you don't ask it to supply to much current. The maximum current rating for the device will be on the data sheet and is usually dependent on the package type it comes in.

    Hope this helps ............
     
  5. duke37

    duke37

    5,211
    718
    Jan 9, 2011
    It says 2.5V !
    The input voltage must be more than 3.5V and less than 15V.
     
  6. sharimin

    sharimin

    8
    0
    Dec 17, 2013
    Tq Bob,, :)

    if I change the capacitor, did it effect the output voltage
     
  7. davenn

    davenn Moderator

    13,242
    1,741
    Sep 5, 2009
    no

    Dave
     
  8. BobK

    BobK

    7,598
    1,641
    Jan 5, 2010
    No, if you want an adjustable regulator they are available. LM317 is a popular one.

    Bob
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-