Connect with us

How does this ic work

Discussion in 'Electronic Basics' started by GLM590620, Jun 29, 2004.

Scroll to continue with content
  1. GLM590620

    GLM590620 Guest

    Dear all

    Ok so i got this six pin ic on a board that is about ten or more years old and
    i'm unable to find any data on it at all, it;s definatly an optocoupler and it
    should be an ac input, i say should be as the wire feeding pin one is 100 v ac,
    i'm unable to asertain as to the sort of signal that sould be present on pin
    two, looking at a data sheet on a Toshiba TLP630 it shows an arrow pointing
    inwards towards the ic on both pins 1 and 2, so how does this thing work , i've
    used the usuall configuration in an optocoupler, ie, anode-cathode, but this is
    baffiling me.

    gavin
     
  2. Anders

    Anders Guest

Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads
There are no similar threads yet.
Loading...
Electronics Point Logo
Continue to site
Quote of the day

-