Connect with us

How do you disconnect these type of ribbon cables?

Discussion in 'Troubleshooting and Repair' started by webbeing, Aug 7, 2014.

Scroll to continue with content
  1. webbeing

    webbeing

    1
    0
    Aug 7, 2014
    Hello,

    Could you please give some suggestion on how to disconnect the two ribbon cables below?

    Many thanks.

    upload_2014-8-7_15-8-18.png
    upload_2014-8-7_15-12-37.png
     
  2. KrisBlueNZ

    KrisBlueNZ Sadly passed away in 2015

    8,393
    1,270
    Nov 28, 2011
    I don't know about the first one. It looks like a plug/socket arrangement.

    I think the second cable is soldered directly into the board. The plastic bits are only there to stop the wires from being bent sharply where they join the board and eventually breaking. If that's the case, you will need to desolder the wires individually.
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-