Connect with us

How can I build a lightsabre ???

Discussion in 'Electronic Components' started by Ed Zagmoon, Nov 5, 2006.

Scroll to continue with content
  1. Ed Zagmoon

    Ed Zagmoon Guest

    My Sith-Lord demands that I build my own lightsabre. But I don't know
    how.

    Please help me , or my Sith-Lord will chop off my dick if I fail to
    build a
    lightsabre within 10 days.

    How can I build a lightsabre?
     

  2. How will he know where to stop cutting?


    --
    Service to my country? Been there, Done that, and I've got my DD214 to
    prove it.
    Member of DAV #85.

    Michael A. Terrell
    Central Florida
     
  3. Sjouke Burry

    Sjouke Burry Guest

    Paint your dick with luminicent paint,
    or use fluorecent paint and parade in front of
    an UV tube.
    That should get you(Ed) operating at the top of
    your IQ.
     
  4. Baron

    Baron Guest

    Your a bit late... Bobit beat you to it !
     
  5. nospam

    nospam Guest

    Q. How can I get lots of dummies to cross post to alt.recipes.babies ?

    A. Post dumb questions like this

    --
     
  6. Guest

    1) Take one standard fluorscent light tube.
    2) Partly fill with gasoline.
    3) Wait few minutes for vapors to fill tube.
    4) Walk up to Sith-Lord
    4) Light end.
    Done (two less bad guys).
    5) If your up to this step you didn't make it properly. Start again at
    step 1).
     
  7. JW

    JW Guest

    Or start, for that matter...
     

  8. Kind of like the Three Stooges?


    --
    Service to my country? Been there, Done that, and I've got my DD214 to
    prove it.
    Member of DAV #85.

    Michael A. Terrell
    Central Florida
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-