Connect with us

How can fix 24v /80amps battery charger voltage drop while connect load-pls help

Discussion in 'Power Electronics' started by hareeshkp, Jan 27, 2021.

Scroll to continue with content
  1. hareeshkp

    hareeshkp

    1
    0
    Jan 27, 2021
    I have battery 24v/80 amps battery charger but only its can give 8amps .if we connect more load voltage drops to 12 volt.pls help me to fix this problem
     
  2. Alec_t

    Alec_t

    2,926
    796
    Jul 7, 2015
    Welcome to EP!
    Can you post a link to the charger's specification/datasheet/advert?
     
  3. HellasTechn

    HellasTechn

    1,553
    215
    Apr 14, 2013
    Welcome.
    Are you sure that the the fault lies within the charger itself ?
    Could it be that the battery you want to charge does not need more than 8 Amps ? That could happen if the battery is partialy discharged. In other words the battery may not be discharged to the point that will require more than 8 Amps.
    Many batteries, depending on the type etc, will draw less curent while their voltage is rising during a charge cycle.

    I am not sure about the voltage droping to 12V on the charger
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-