Connect with us

Hot plate regulator again.

Discussion in 'Electronic Design' started by Ken S. Tucker, Mar 7, 2012.

Scroll to continue with content
  1. Hot plate maxes out at 1000W, selected regulating triac is nte56004.
    200V, 15A.
    I'll try taking an off-the-shelf dimmer and swap in the new triac.
    Should work right?
    Ken
     
  2. ehsjr

    ehsjr Guest

    I assume the reason you want to swap the new triac into the OTS
    (off the shelf) dimmer is to get a higher wattage than the OTS
    dimmer's rating. Heat sink size might be a consideration - I'm
    guessing it won't be big enough.

    Ed
     
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day

-