Connect with us

Horizontal scrolling bar from VCR

Discussion in 'Electronic Repair' started by Lukas Louw, Jul 25, 2006.

Scroll to continue with content
  1. Lukas Louw

    Lukas Louw Guest

    One of our VCRs cause a purplish horizontal scrolling bar, about 1/3 of the
    screen height on the TV. Scroll speed is about 2 seconds or so. Any idea
    what could cause this? Dirty heads?

  2. Sofie

    Sofie Guest

    Q1: Is this happening all through the tape or just in one spot for a few
    Q2: does this happen on ALL tapes or just tapes that you have home
    - - - - - - - - - -
  3. Circuit problem. Power supply capacitor(s) most likely.

    Mark Z.
  4. Lukas Louw

    Lukas Louw Guest

    All tapes, and for full duration..

    I'll open it up and check PSU caps as Mark had suggested.

Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Electronics Point Logo
Continue to site
Quote of the day