Maker Pro
Maker Pro

hooked up my dialer

S

Spork

Jan 1, 1970
0
hello. I finally hooked up a dialer to my lynx. I used a relay as suggested
and hooked it up to the bell terminals.

The first problem I had was the arming "ding" output through the siren so it
would activate my relay. I'm glad there was a option to diable this.

When the lynx is in alarm it will make announcements while shutting down the
siren for a second. this causes the dialer to keep tripping from the on/off
and I hear the relay clicking inside the dialer .

This means the dialer doesnt stop cycling until the siren shuts off. as
long as it works though im ok with it. I was just concerned if it could
damage the dialer from the relay tripping on and off while it was already in
action?

thanks again for the time everyone has taken to help me. I'm almost there!

Spork
 
Top